451-030 Hermle Mechanical Clock Movement
Direct from Germany - Two Year Warranty
The Hermle 451-030 Slim 'n Trim design Mechanical Movement is a versitile, 8-day chain-driven Westminster Chime movement for grandmother clocks.
Five hammers are mounted in the side position.
It is only 4 1/2 inches deep, making it good for grandmother clocks and other short pendulum designs.
Available Pendulum Gearing Lengths: 55cm, 66cm, 94cm and 114cm long.
- Dimensions: 120 x 120 mm, with an internal distance of 32 mm between the plates.
- Handshaft: 33.2 mm.
- Weight Drop: 52 in.
- 5 Hammer down.
- Chains Included
- Factory Pre-Oiled.
- Quality Bronze Brushings.
- Westminster Chimes
Movement and chains Complete
Two Year warranty
Direct from Germany.
Please Note: Low Bridge movements will be flat across the top. High Bridge movements
will have an arch ( Bridge) across the top of the movement.
Low bridge movements are usually Dead Beat and High Bridge are usually Auto Beat movements.
Your movement will be marked on the backside with the item number. The pendulum length
just below the ID# Example: 415-053
Please Note: After 1979 Hermle started making the High Bridge 451-050. If you have a low bridge/dead beat it was made before 1979.