451-030  Hermle Mechanical Clock Movement

Direct from Germany - Two Year Warranty

The Hermle 451-030 Slim 'n Trim Mechanical Movement is a versitile, 8-day chain-driven Westminster movement for grandfather clocks.  The hammers are mounted on the left side of the movement.  It is only 4 1/2 inches deep, making it good for grandmother clocks and other short pendulum designs.

Available Pendulum Lengths: 55cm, 66cm, 94cm and 114cm

Specifications:

• Dimensions: 120 x 120 mm, with an internal distance of 32 mm between the plates.
• Handshaft: 33.2 mm.
• Weight Drop: 52 in.
  
• 5 Hammer side.
• Chains Included
• Factory Pre-Oiled.
• Quality Bronze Brushings.
  
• Westminster Chimes

Movement and chains Complete

Three Year warranty

 Direct from Germany.

 Please Note:  Low Bridge movements will be flat across the top.  High Bridge movements

will have an arch ( Bridge) across the top of the movement.

Low bridge movements are usually Dead Beat and High Bridge are usually Auto Beat movements.

Your movement will be marked on the backside with the item number.  The pendulum length

 just below the ID#   Example: 415-053 

                                                  94cm

Please Note:  After 1979 Hermle started making the High Bridge 451-050.  If you have a low bridge/dead beat it was made before 1979.